包容性设计视域下的自动驾驶适老化智能座舱座椅设计
包容性设计与通用设计的理论框架及适老化设计原则
合并两组初始化结果中关于包容性/通用设计本体理论的文献:共同点是讨论如何把年龄相关的感官、认知与情感差异纳入设计框架,给出设计价值基座与可操作原则,并通过导视系统、数字包容、自然游憩环境等跨领域案例以及跨年龄通用隐喻的实证加以验证;UCD人体工程学与包容性设计的结合进一步明确了"用户中心—包容性"的方法路径,为适老化智能座舱座椅确立设计准则。
- 包容性设计原则在适老化社区改造中的实施路径(Kang-Hui Han, 2026, 城市建筑与发展)
- 包容性设计视角下:破解社区"寻路困境"的适老导视系统实证研究(嘉欣 李, 晓燕 王, 方铃 宁, 双静 张, 2025, 素质教育)
- 数字包容视域下银发族智能家居用户体验设计研究(国军 张, 传兵 刘, 2026, 教研导刊)
- Guiding the Design of Inclusive Interactive Systems: Do Younger and Older Adults Use the Same Image-schematic Metaphors?(Jingyi Li, Nathan Crilly, P. O. Kristensson, 2024, ACM Transactions on Computer-Human Interaction)
- UCD, Ergonomics and Inclusive Design: The HABITAT Project(G. Mincolelli, M. Marchi, Gian Andrea Giacobone, L. Chiari, Elena Borelli, S. Mellone, C. Tacconi, T. S. Cinotti, L. Roffia, Francesco Antoniazzi, A. Costanzo, G. Paolini, D. Masotti, P. Mello, F. Chesani, Daniela Loreti, Silvia Imbesi, 2018, Advances in Intelligent Systems and Computing)
- Forest- and Nature-Based Recreation for Older Adults: Preferences, Well-Being, and the Need for Inclusive Planning(Yaara Spiegel, N. Collins-Kreiner, Eran Ketter, 2025, Forests)
老龄社会数字化背景与适老化产品的人本设计、共创设计方法
共同点是把老龄化作为社会技术背景,研究老年人对数字健康技术、城市出行服务与人工智能辅助产品的接受度、使用障碍与参与式设计机制,强调共创(co-design)从项目实践走向可持续组织能力;为适老化智能座舱座椅提供需求语境、参与式研究方法与社会包容性论证。
- 老龄化社会公共信息海报的包容性设计研究(文洋 刘, 2026, 人文社会发展)
- Elderly and digital health technologies: the relationship between Gerontechnology and Design for active and healthy ageing.(Francesca Tosi, Mattia Pistolesi, Claudia Becchimanzi, 2024, AHFE International)
- Enhancing Urban Mobility for All: The Role of Universal Design in Supporting Social Inclusion for Older Adults and People with Disabilities(Alba Ramírez-Saiz, María Teresa Baquero Larriva, Delfín Jiménez Martín, Andrea Alonso, 2025, Urban Science)
- From co-design to sustainable practice: Reflections on inclusive physical activity for older adults.(Miglė Kiguolytė, Benjamin H. L. Harris, L. Koizia, 2025, Archives of gerontology and geriatrics (Print))
- “人工智能+”背景下老年群体医疗辅助产品设计探索(Zi-Y. Guo, Zi-Gui Chen, 2025, 环球医学研究)
智能产品、可穿戴与XR设备的适老化交互设计实证与辅助技术
合并原"数字产品适老化交互实证"与"适老化智能辅助与健康支持技术"两组:共同关注老年人使用小屏智能手表、网页、自助服务、VR/XR训练系统及可穿戴助行装置时的视觉可读性、认知负荷、操作反馈与使用意愿问题,采用同理心映射、系统综述、对照实验与设计指南构建等实证方法提炼具体设计准则,可直接迁移到座舱智能交互与座椅辅助功能设计中。
- Designing Inclusive Smartwatch Interfaces: Guidelines for Enhancing Usability and Adoption Among Older Adults(Rui P. Duarte, Valter Alves, Mickael Mota, 2025, IEEE Access)
- Accessible Web Design for Older Adults: Challenges and Solutions(Washington Chiriboga-Casanova, Nuria Medina-Medina, P. Paderewski-Rodríguez, 2025, ACM Transactions on Accessible Computing)
- Empathy Mapping for Inclusive Design: A Qualitative Exploration of Older Adults’ Experiences With Self-Order Kiosks in Restaurant Settings(Kin Meng Cheng, Ah-Choo Koo, Siew Chein Teo, 2026, SAGE Open)
- Research on Interaction Design of Aging Smart Home Products Based on Qfdtriz(Bei Zhang, Jianming Li, 2020, No journal)
- Toward Making Virtual Reality (VR) More Inclusive for Older Adults: Investigating Aging Effect on Target Selection and Manipulation Tasks in VR(Zhi-Qing Wu, Duo-Tun Wang, Shu-Meng Zhang, Yu-Ru Huang, Ze-Yu Wang, Ming-Ming Fan, 2024, International Conference on Human Factors in Computing Systems)
- Inclusive User Experience Design for Older Adults: Focusing on XR-Based Cognitive and Physical Training(Taehong Kim, Jun-Hyung Do, Joong Il Kim, Jeong Woo Seo, Youngjae Jeong, Kyongmi Jang, 2024, International Conference on Big Data and Smart Computing)
- Design of Smart Wearable Leg Devices for Older Adults Based on TPG Inclusive Design Principles(Xin Pan, Chun-Mao Wu, 2025, Interacción)
自动驾驶座舱空间布局、人际距离与乘坐环境评价
共同以座舱整体空间组织为对象,研究座椅布置方案(面对面/并列)与空间效率、乘员间最舒适人际距离与私密性需求、非驾驶活动下的布局组件配置指南,以及用户对座舱装备与乘坐环境的主观评价;属于座舱层级(而非单体座椅层级)的布局与体验研究,为适老化座椅的空间定位与邻接关系提供依据。
- PACKAGE PLANNING OF AUTONOMOUS VEHICLE CONCEPTS(Adrian König, Daniel Telschow, L. Nicoletti, M. Lienkamp, 2021, Proceedings of the Design Society)
- Identifying the most comfortable interpersonal distances for autonomous vehicles' passengers.(Ilaria Chiriani, Iolanda Fiorillo, Wolf Song, P. Vink, Alessandro Naddeo, 2026, Applied Ergonomics)
- Evaluation of the Seating Environment of an Autonomous Taxi on User Needs – An Online Survey Investigation(Manuel Kipp, C.-T. Guo, K. Bengler, 2022, Human Factors in Transportation)
- 基于人机交互视角下无人自动驾驶的国民接受意愿研究(Di Zhang, 2025, 社会科学前沿)
- Spatial Components Guidelines in a Face-to-Face Seating Arrangement for Flexible Layout of Autonomous Vehicles(J. Kwon, Da-Young Ju, 2021, Electronics)
自动驾驶非驾驶活动姿态需求与乘员布置人体建模
共同关注自动驾驶释放驾驶任务后乘员在阅读、办公、休息、社交等活动中的坐姿需求与座椅朝向、倾角变化,并用用户中心设计方法评估用户期待、以数字人体模型支撑乘员布置(packaging)与路径层级的空间校验;为适老化智能座椅的姿态调节范围与活动适配提供需求与建模依据。
- Seating Postures for Autonomous Driving Secondary Activities(S. Parida, Sai Mallavarapu, S. Abanteriba, M. Franz, Wolfgang Gruener, 2019, Innovation in Medicine and Healthcare Systems, and Multimedia)
- User-Centered-Design Approach to Evaluate the User Acceptance of Seating Postures for Autonomous Driving Secondary Activities in a Passenger Vehicle(S. Parida, Sai Mallavarapu, S. Abanteriba, M. Franz, Wolfgang Gruener, 2018, International Conference on Human Systems Engineering and Design)
- Digital Human Modelling, Occupant Packaging and Autonomous Vehicle Interior(S. Parida, S. Abanteriba, M. Franz, 2019, International Conference on Human Systems Engineering and Design)
- 基于人-车-路耦合振动系统的儿童乘坐舒适性(Kai Qian, Qi-Guo Hu, Li-Ke Li, 2013, No journal)
智能座舱多模态无障碍交互与车内辅助功能设计
共同涉及语音助手、座椅触觉与空间音频、多感官色彩编码、替代性动作识别以及伴随式智能车功能优化,并讨论自动驾驶下人车交互关系的重塑;重点在于降低老年与残障用户的感知与认知门槛,支撑座椅寻找、状态提示与车内辅助操作,体现包容性交互设计在智能座舱中的落地路径。
- Designing ethical and inclusive voice assistants through co-creation with older adults(C. González-González, V. Violant-Holz, L. Colombo-Ruano, C. Rodríguez-Silva, 2025, Behavior and Information Technology)
- Get In Touch with Your Seat: Accessible Seat Localization for Blind and Low Vision Travelers in Autonomous Shuttles(Paul D. S. Fink, Justin R. Brown, Raina M. Movalia, Kyle J. James, M. E. Kastelein, Jacob Bond, M. Andrulis, Nicholas A. Giudice, 2026, Proceedings of the Extended Abstracts of the 2026 CHI Conference on Human Factors in Computing Systems)
- Multisensory Coding of Red and Blue in Interior Design for Older Adults and Visually Impaired Users: An Inclusive Design Perspective(Agnieszka Rek-Lipczyńska, A. Kowalska, 2025, Sustainability)
- Alternative movement identification in the automobile ingress and egress for young and elderly population with or without prostheses(Mohand Ouidir Ait El Menceur, P. Pudlo, P. Gorce, A. Thevenon, F. Lepoutre, 2008, International Journal of Industrial Ergonomics)
- Optimized Design of Accompanying Smart Car for the Elderly Based on Humanization Design Methods(Mengyi Cao, Xingyi Zhong, Ting Han, 2019, International Conference on Applied Human Factors and Ergonomics)
- Shaping driver-vehicle interaction in autonomous vehicles: How the new in-vehicle systems match the human needs.(Xu Sun, Shi Cao, Pin-Yan Tang, 2020, Applied Ergonomics)
乘员(含老年群体)上下车动作策略与运动学实证
合并两组中关于进出行为本身的实证研究:共同测量上下车时间、关节角度、动作策略与主观不适,建立老年人及患病群体的上下车动作数据库并与年轻群体对照,涵盖实车、模拟器与飞机座椅等场景;揭示运动能力衰减导致的动作代偿与跌倒风险,是适老化座椅进出可达性设计的用户证据基础。
- Ingress and egress motion strategies of elderly and young passengers for the rear seat of minivans with sliding doors.(Jun-Ming Lu, M. Tada, Y. Endo, M. Mochimaru, 2016, Applied Ergonomics)
- Ingress/egress motion strategies of the elderly people for the rear seat of minivans with sliding doors(J.-M. Lu, M. Tada, Y. Endo, M. Mochimaru, 2013, No journal)
- ELDERLY DRIVER INGRESS AND EGRESS FROM A VEHICLE: PERCEIVED DISCOMFORT AND TASK DURATION(K. Kozak, P. M. Shahshahani, J. Wan, N. Wang, A. Kapshai, Trina K. DeMott, J. Richardson, J. Ashton-Miller, 2018, Innovation in aging)
- Movement Analysis of Elderly People during Ingress/Egress from Different Seat Heights(Yongchul Kim, 2011, Journal of The Ergonomics Society of Korea)
- INGRESS / EGRESS MOVEMENT FOR ELDERLY AND PATHOLOGICAL POPULATION(Ait El Menceur, 2006, No journal)
- Automobile vehicle ingress/egress movement strategies adopted by elderly and/or, hip or knee, prosthesis having persons(Mohand Ouidir Ait El Menceur, P. Pudlo, P. Gorce, F. Lepoutre, 2007, IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design, and Evaluation of Human-Machine Systems)
- A Database of Ingress / Egress Motions of Elderly People(E. Chateauroux, Xu-Guang Wang, J. Trasbot, 2007, No journal)
- Aircraft Seat in- and Egress Differences between Elderly and Young Adults(W. Lijmbach, Peter Miehlke, P. Vink, 2014, Proceedings of the Human Factors and Ergonomics Society Annual Meeting)
进出便利性优化设计:车门开口参数、门系统方案与旋转平移辅助座椅装置
共同以提升进出便利性为设计目标,研究车门开启角度、门槛与顶棚位置、门系统新方案及损失函数等参数化优化方法,并评估座椅朝向、空间障碍物与旋转平移(roto-translating)等智能辅助座椅装置对老年乘员进出体验与省力效果的改善;直接对应适老化智能座舱座椅的无障碍进出设计与人因验证。
- A STUDY OF IMPROVING VEHICLE INGRESS/EGRESS EASE FOR ELDERLY PERSONS(Y. Nakahama, H. Nemoto, T. Yanagishima, 2000, No journal)
- Multidisciplinary Development of New Door and Seat Concepts as Part of an Ergonomic Ingress/Egress Support System(M. Fischer, C. Richter, S. Braun, D. Hellenbrand, O. Sabbah, C. Scharfenberger, M. Strolz, P. Kuhl, G. Farber, 2008, No journal)
- Developing Customer Loss Function for Door Opening Angle in Passenger Cars: Balancing the Ergonomic Performance between “Entry/Exit (Ingress/Egress) Accommodation” and Door Reachability(Sriram Rajakumaran, K. Sreenivas, 2024, SAE International Journal of Passenger Vehicle Systems)
- Effect of seat orientation on ingress/egress joint kinematics and reach envelope(Christopher W. Moore, 2013, Occupational ergonomics)
- The influence of spatial barriers on the ingress/egress movement toward an aircraft seat for persons with reduced mobility: a preliminary study(C. Molenaar, F. Gabrielli, P. Pudlo, 2015, Computer Methods in Biomechanics and Biomedical Engineering)
- Validation study of a roto-translating seat to support elderly drivers during car ingress/egress: a Biomechanical Analysis(Alessia Cristiano, A. Sanna, Diana Trojaniello, Davide Corbetta, A. Tettamanti, 2018, IEEE International Symposium on Medical Measurements and Applications)
- Intelligent car seat design with ingress, egress and sit-to-stand services(S. Wong, B. Lin, Z.-C. Luo, Y.-F. Cong, 2016, IEEE International Conference on Industrial Engineering and Engineering Management)
自动驾驶新型座椅姿态与构型下的乘员被动安全、损伤风险与法规适配
合并原"座椅姿态与乘员运动学"与"非标准构型碰撞安全与法规"两组:共同以碰撞或紧急制动工况下的乘员保护为核心,研究旋转座椅、大角度后倾与"客厅式"布置造成的头部运动学异常、前向位移、下潜与约束失效,探索安全域包络预测、自适应约束与气囊座椅协同方案,并讨论老年乘员事故伤害风险与新型构型下的监管标准适配路径,构成适老化大姿态座椅的安全底线。
- The prediction of autonomous vehicle occupants’ pre-crash motion during emergency braking scenarios(Alexander Diederich, C. Bastien, M. Blundell, 2023, Proceedings of the Institution of mechanical engineers. Part D, journal of automobile engineering)
- Occupant Kinematics in Simulated Autonomous Driving Vehicle Collisions: Influence of Seating Position, Direction and Angle.(Y. Kitagawa, Shigeki Hayashi, Katsunori Yamada, M. Gotoh, 2017, Stapp Car Crash Journal)
- Passive Occupant Safety Solutions for Non-Conventional Seating Positions(Laszlo Porkolab, Istvan Lakatos, 2026, Future Transportation)
- Reclined Seating Postures on Passive Safety Performance in Automotive Seats: A Review(Nuno Carmo, J. Milho, Marta Carvalho, 2026, Machines)
- Influence of Autonomous Vehicle Interior Design on Occupant Injuries(Lukas Rozek, Andrew Harrison, Christian Birkner, 2025, 2025 IEEE Intelligent Vehicles Symposium (IV))
- Virthuman Application: Is an Autonomous Vehicle with Non-standard Seating Safe in a Side Crash?(Abbas Talimian, J. Vychytil, 2022, Periodica Polytechnica Transportation Engineering)
- Potential Regulatory Approaches for Occupant Safety in Automated Vehicles with Unique Seating Configurations – Part 1: Occupant Protection Proposals(Scott D. Thomas, 2026, SAE technical paper series)
- Accident and Injury Risks of Elderly Car Occupants(H. Johannsen, G. Müller, 2013, No journal)
座椅结构集成、隔振设计与乘员生物力学响应
从结构、材料与力学角度研究座椅本体:一体化座椅与车身结构的振动模态与刚度特性、准零刚度隔振方案对振动传递的抑制,以及乘员生物力学响应建模;为适老化座椅在结构安全、振动舒适与长时间乘坐支撑方面提供工程支撑,区别于偏主观评价的人机工程研究。
- Exploring integrated seating structures in fully autonomous vehicles from an NVH perspective(Shaun Whimpey, Bernard Rolfe, K. Ghabraie, Mohammad Fard, 2023, INTER-NOISE and NOISE-CON Congress and Conference Proceedings)
- 基于准零刚度隔振器的车-座椅-人耦合模型动态特性研究(Yong Wang, Shunming Li, Chun Cheng, 2016, No journal)
- 基于生物力学的驾驶舱坐姿舒适性评价 Sitting Comfort Evaluation of the Cockpit Based on Biomechanics(孔云志, 孙有朝, 2017, Computer Science and Application)
座椅人机工程评价与适老化舒适性设计准则
共同以人体尺寸、压力分布与主观舒适评价为依据,开展老年人人体工程学座椅开发、车内人体坐姿与座面参数研究、便捷器具人机工程评价以及客车乘客人体尺寸与布置标准分析,形成适老化座椅在支撑、尺寸、可达性方面的舒适性设计准则与评价方法。
- An Ergonomics Research for Developing Senior Citizens’ Mobile Devices Gesture Display(Shou-Fa Liu, Ming-Hong Wang, M. Lin, T. Huang, 2016, No journal)
- Ergonomic Evaluation of Convenient Appliances for Elderly Driver's Ingress/Egress(Woo-Chul Park, Young-Seon Yang, Chee-Hwan Jang, Dae-jin An, Sunghyun Lim, 2010, Journal of The Ergonomics Society of Korea)
- 汽车“人体—座椅”单质量系统模型的动力学参数选择(Wei Wang, 2009, No journal)
- Aging smart seat design based on Python(J. Liu, Yuanyuan Li, 2024, No journal)
- 国标《客车乘客座椅尺寸规格》的说明(Feng Li, 1990, No journal)
座椅智能感知、健康支持与个性化调节控制技术
共同聚焦座椅的"感知—决策—调节"技术链:基于传感技术识别乘员坐姿与生理状态、面向健康支持的智能座椅方案、个性化机械结构与制造实现,以及通过车辆运动控制逻辑改善乘坐舒适性;为适老化智能座椅的自动适配、健康监测与主动调节提供技术实现路径。
- ji yu jian kang zuo zi de xin xing zuo yi she ji yan jiu(Jian-Jun Hou, 2010, Science and Technology Information)
- 基于传感技术的汽车座椅舒适性控制系统研发(立强 孙, 2026, 项目工程)
- 机械设计制造技术在个性化座椅中的应用研究(Chong Li, 2025, 工程建设)
- Development of Vehicle Motion Control Logic for Ride Comfort Optimization Based on Passenger Seating Position(Beomhyuk Park, Sangho Lee, Jee-Yoon Suh, W. Cho, Seung-Han You, 2025, IEEE Access)
合并后共形成12个并列分组、覆盖全部68篇文献,按\"理论基座—社会语境与方法—智能产品交互实证—座舱空间与姿态—进出便利—被动安全—座椅结构与舒适技术\"的逻辑递进组织:前三组(包容性设计理论与原则、老龄社会语境与共创方法、智能产品与XR/可穿戴适老化交互实证)提供价值基座、研究方法与通用交互准则;中段五组聚焦自动驾驶场景落地(座舱空间布局与人际距离、非驾驶活动姿态与人体建模、多模态无障碍人车交互、乘员上下车动作实证、车门开口与辅助座椅的进出优化设计);后段四组构成工程安全与技术支撑(新型座椅姿态下的被动安全与法规适配、座椅结构集成与隔振生物力学、人机工程舒适性评价准则、智能感知与个性化调节控制)。各分组相互并列、边界清晰,共同支撑\"包容性设计视域下自动驾驶适老化智能座舱座椅\"从需求证据到设计准则再到工程验证的完整研究框架。
合并两组初始化结果中关于包容性/通用设计本体理论的文献:共同点是讨论如何把年龄相关的感官、认知与情感差异纳入设计框架,给出设计价值基座与可操作原则,并通过导视系统、数字包容、自然游憩环境等跨领域案例以及跨年龄通用隐喻的实证加以验证;UCD人体工程学与包容性设计的结合进一步明确了"用户中心—包容性"的方法路径,为适老化智能座舱座椅确立设计准则。相关文献:Kang-Hui Han et. al, 2026 等 6 篇文献
共同点是把老龄化作为社会技术背景,研究老年人对数字健康技术、城市出行服务与人工智能辅助产品的接受度、使用障碍与参与式设计机制,强调共创(co-design)从项目实践走向可持续组织能力;为适老化智能座舱座椅提供需求语境、参与式研究方法与社会包容性论证。相关文献:文洋 刘 et. al, 2026 等 5 篇文献
合并原"数字产品适老化交互实证"与"适老化智能辅助与健康支持技术"两组:共同关注老年人使用小屏智能手表、网页、自助服务、VR/XR训练系统及可穿戴助行装置时的视觉可读性、认知负荷、操作反馈与使用意愿问题,采用同理心映射、系统综述、对照实验与设计指南构建等实证方法提炼具体设计准则,可直接迁移到座舱智能交互与座椅辅助功能设计中。相关文献:Rui P. Duarte et. al, 2025 等 7 篇文献
共同以座舱整体空间组织为对象,研究座椅布置方案(面对面/并列)与空间效率、乘员间最舒适人际距离与私密性需求、非驾驶活动下的布局组件配置指南,以及用户对座舱装备与乘坐环境的主观评价;属于座舱层级(而非单体座椅层级)的布局与体验研究,为适老化座椅的空间定位与邻接关系提供依据。相关文献:Adrian König et. al, 2021 等 5 篇文献
共同关注自动驾驶释放驾驶任务后乘员在阅读、办公、休息、社交等活动中的坐姿需求与座椅朝向、倾角变化,并用用户中心设计方法评估用户期待、以数字人体模型支撑乘员布置(packaging)与路径层级的空间校验;为适老化智能座椅的姿态调节范围与活动适配提供需求与建模依据。相关文献:S. Parida et. al, 2019 等 4 篇文献
共同涉及语音助手、座椅触觉与空间音频、多感官色彩编码、替代性动作识别以及伴随式智能车功能优化,并讨论自动驾驶下人车交互关系的重塑;重点在于降低老年与残障用户的感知与认知门槛,支撑座椅寻找、状态提示与车内辅助操作,体现包容性交互设计在智能座舱中的落地路径。相关文献:C. González-González et. al, 2025 等 6 篇文献
合并两组中关于进出行为本身的实证研究:共同测量上下车时间、关节角度、动作策略与主观不适,建立老年人及患病群体的上下车动作数据库并与年轻群体对照,涵盖实车、模拟器与飞机座椅等场景;揭示运动能力衰减导致的动作代偿与跌倒风险,是适老化座椅进出可达性设计的用户证据基础。相关文献:Jun-Ming Lu et. al, 2016 等 8 篇文献
共同以提升进出便利性为设计目标,研究车门开启角度、门槛与顶棚位置、门系统新方案及损失函数等参数化优化方法,并评估座椅朝向、空间障碍物与旋转平移(roto-translating)等智能辅助座椅装置对老年乘员进出体验与省力效果的改善;直接对应适老化智能座舱座椅的无障碍进出设计与人因验证。相关文献:Y. Nakahama et. al, 2000 等 7 篇文献
合并原"座椅姿态与乘员运动学"与"非标准构型碰撞安全与法规"两组:共同以碰撞或紧急制动工况下的乘员保护为核心,研究旋转座椅、大角度后倾与"客厅式"布置造成的头部运动学异常、前向位移、下潜与约束失效,探索安全域包络预测、自适应约束与气囊座椅协同方案,并讨论老年乘员事故伤害风险与新型构型下的监管标准适配路径,构成适老化大姿态座椅的安全底线。相关文献:Alexander Diederich et. al, 2023 等 8 篇文献
从结构、材料与力学角度研究座椅本体:一体化座椅与车身结构的振动模态与刚度特性、准零刚度隔振方案对振动传递的抑制,以及乘员生物力学响应建模;为适老化座椅在结构安全、振动舒适与长时间乘坐支撑方面提供工程支撑,区别于偏主观评价的人机工程研究。相关文献:Shaun Whimpey et. al, 2023 等 3 篇文献
共同以人体尺寸、压力分布与主观舒适评价为依据,开展老年人人体工程学座椅开发、车内人体坐姿与座面参数研究、便捷器具人机工程评价以及客车乘客人体尺寸与布置标准分析,形成适老化座椅在支撑、尺寸、可达性方面的舒适性设计准则与评价方法。相关文献:Shou-Fa Liu et. al, 2016 等 5 篇文献
共同聚焦座椅的"感知—决策—调节"技术链:基于传感技术识别乘员坐姿与生理状态、面向健康支持的智能座椅方案、个性化机械结构与制造实现,以及通过车辆运动控制逻辑改善乘坐舒适性;为适老化智能座椅的自动适配、健康监测与主动调节提供技术实现路径。相关文献:Jian-Jun Hou et. al, 2010 等 4 篇文献
总计 68 篇相关文献
人口老龄化背景下,社区是老年人主要活动空间,复杂环境易使老人陷入寻路困境,滋生负面情绪。本文调研昆明盘龙区新迎社区,发现导视系统存在三重问题:视觉标识色差弱、字体偏小;关键点位标识缺失、信息排布无序;内容繁杂、符号难以理解。依托包容性设计理论,构建"视觉增强——认知减负——情感包容"优化策略,经模拟设计与居民回访验证有效。重构适老导视可提升老人自主出行能力,是保障老年人生活尊严的基础配套。
随着人口老龄化加剧,深度老龄化催生“银发经济”与“智慧养老”需求,智能家居技术被视为缓解养老压力的关键技术载体。但现有产品多以“技术导向”设计为主,忽视银发族生理认知特征与数字包容需求,致使其使用率低,形成新的“老年数字鸿沟”。本文研究发现,银发族核心需求可以归纳为安全保障、便捷操作、情感联结、尊严维护等几个方面,基于此,设计智能家居,可以显著提升老人操作的满意度与技术接受度。本文的研究可以为消弭老年数字鸿沟,推动智能家居从“适老化”朝着“包容化”升级提供理论参考,这对构建“全龄友好”的数字生态有重要意义。
在老龄化社会背景下,现有公共信息海报在视觉、内容与情感表达上存在包容性缺失,对老年群体构成信息获取障碍的问题。从包容性设计理念出发,在视觉上通过优化字体、色彩与图形,提升可读性;在内容上,通过简化信息层级与文案,降低认知负荷;在情感上,通过塑造积极正面的老年形象,传递尊重与赋能。老龄化社会公共信息海报的包容性设计,在提升公共信息设计的人文关怀,为构建普惠、共融的年龄友好型社会有着重要的理论和实践意义。
伴随人工智能与自动驾驶技术的迅猛发展,无人驾驶汽车开始从实验阶段往商业化落地阶段转变。然而,技术成熟状态并非自动对应社会接受程度,公众的认知、情感、信任以及人机交互体验等相关因素,是影响其推广的关键。本文借助人机交互视角开展,结合采用问卷调查及深度访谈方式,剖析不同人群对无人自动驾驶技术接纳意愿及影响因素。直观性的交互界面、及时性的安全反馈、信任机制的构建状况、隐私保护效果以及用户教育水平等,是对公众接受度起到显著影响的关键变量。
郭紫伊,陈子归* 湖南工商大学设计艺术学院,湖南长沙 摘要:随着全球老龄化进程不断加快,老年群体对医疗辅助产品的需求日益凸显。本文从老年用户的生理与心理特征出发,结合人机工程学、智能技术与情感化设计理论,系统探讨医疗辅助产品的创新设计路径,提出以“安全性、易用性、智能性、情感化”为核心的设计策略,并结合实际案例验证其可行性,旨在为人工智能+背景下老年群体医疗辅助产品研发与设计提供理论参考与实践指引。
汽车智能化、民用化的发展使驾乘舒适性成为人们选车、用车的重要考虑条件,汽车 座椅作为人体和汽车的直接接触部分,座椅舒适性直接影响着驾乘体验。本文基于传 感检测技术开发了一种汽车座椅舒适性控制系统,文章从系统研发依据、主要结构组 成、硬件选型、控制逻辑、存在的问题及改进措施等方面进行了详细研究,解决了传 统固定模式调节带来的问题,并结合具体运行情况对汽车座椅舒适性控制系统的性能 进行优化设计,提高了汽车座椅的适用性和舒适度,为智能汽车座椅控制系统的升级 发展提供参考借鉴。
随着人们个性化需求不断增加,座椅的舒适性、功能性以及安全性愈发受到关注。然而传统座椅设计大多属于标准化生产模式,很难满足不同用户各异的体型状况与使用习惯方面的要求。机械设计制造技术不断向前发展,给个性化座椅带来了全新的实现途径,像精密加工技术、模块化设计方式、3D打印技术、仿真分析手段以及智能控制系统等。这些技术能够对座椅结构予以优化,让舒适度得以提升,功能多样性也有所增强,并且借助数字化管理以及检测手段来确保生产效率与产品质量。不过当前个性化座椅依旧存在着成本偏高、生产周期较长以及技术集成难度颇大的一系列问题,所以还需进一步去探索机械设计制造技术的综合运用情况。
No abstract available
No abstract available
No abstract available
No abstract available
This article analyses the design aspects of multisensory colour experience in interior architecture. It presents the results of comparative studies on the perception of red and blue spatial environments through various senses (vision, hearing, smell, touch, and thermal sensation). The phenomenon of synaesthesia and its potential application in design are discussed, demonstrating how colors can be encoded and perceived through senses other than sight. Spatial solutions are proposed to enable blind individuals to experience color through touch (e.g., differentiated surface textures), sound (appropriate tones or rhythms), temperature (warm vs. cool lighting), and other environmental properties. The text includes references to the cultural and symbolic meanings of red and blue—covering cross-cultural differences and spatial characteristics attributed to these colors—based on an analysis of Stanisław Lem’s novel Solaris. Furthermore, the article formulates design recommendations from the perspective of sustainable development and inclusivity, taking into account European accessibility guidelines and universal design principles. The aim is to present an integrated approach to interior design, in which color becomes an experience accessible to all users, in line with the concept of “Design for All” and the principles of sustainable design.
No abstract available
Self-order kiosks (SOKs) are increasingly common in restaurants, yet many older adults experience them as frustrating rather than convenient because designs are not aligned with age-related needs. Prior research has largely centred on usability problems, while older users’ emotional and cognitive challenges have received less attention. To provide a fuller account of challenges and coping responses, this study combined empathy mapping with thematic analysis to capture what participants said, thought, felt, and did during interaction. We conducted a qualitative case study in Malaysian restaurants, integrating kiosk observation with focus-group discussions. Thirty older adults participated across eight focus groups. Full-sample familiarisation was completed for all cases, followed by a mechanism-focused analysis of a purposive subsample of 15 cases. Three themes emerged: (a) anxiety and queue pressure (Hear × Feel) shaping avoidance and help-seeking; (b) affordance clarity and legibility (See → Do) reducing unnecessary load and error loops; and (c) payment complexity moderated by facilitating conditions (intrinsic load × support) differentiating bail-outs from recovery. Multi-step payments increased intrinsic load and raised bail-outs to the counter, while text and visual clutter elevated extraneous load, contributing to mis-taps and restart loops. Recovery was more likely when help affordances were visible or staff were nearby. We provide a theory-driven conceptual mapping linking cognitive load mechanisms and STAM/UTAUT determinants to empathy-map quadrants, where quadrant interaction patterns (for example, Hear × Feel under queue pressure) explain avoidance and help-seeking. Findings are bounded to Malay/English SOK flows and Malaysian restaurant contexts, with strongest transferability to comparable self-service technologies. Plain Language Summary Listening to Older Adults: Improving Restaurant Kiosks Through Empathy Mapping Self-order kiosks (SOKs) are becoming more common in restaurants, but many older adults find them difficult and frustrating. These challenges go beyond just learning how to use the screens—they also involve emotional stress like confusion, anxiety, and feeling overwhelmed. To better understand these experiences, researchers interacted with 30 older adults in Malaysia through group discussions. Instead of asking questions, they used empathy mapping, which looks at what people say, think, feel, and do. This gave a fuller picture of how older adults interact with kiosks in real situations. The study found three main issues: Emotional Frustration—Many felt anxious, confused, or lacked confidence when using kiosks. Design Problems—Issues included small text, hard-to-use touchscreens, and unclear steps for ordering and paying. Suggested Improvements—Participants recommended changes like larger fonts, easier instructions, and voice guidance. This research highlights ways to improve kiosk design and demonstrates how empathy mapping can help researchers understand users’ experiences. The findings can assist businesses, designers, and policymakers in developing more user-friendly and inclusive technology for older adults.
As urban environments pose significant challenges to people of all ages and abilities, ensuring equal accessibility is essential for achieving social inclusion in cities. Authors claim that universal design, initially developed to assist people with disabilities, can also benefit older adults. Despite common assumptions, there is limited evidence to support this claim. This study examines whether the urban mobility needs of people with disabilities (physical, sensory, and cognitive) align with those of older adults, both with regular physiological ageing or age-related diseases. Using an integrative review methodology, this study synthesized 56 references on urban mobility measures and 121 references on the specific urban requirements and mobility profiles for both groups and subgroups. The findings reveal significant overlaps in the mobility requirements of people with disabilities and older adults, particularly regarding inclusive features such as barrier-free crossings, intermediate seating, noise reduction, and improved wayfinding. These measures benefit both groups, with universal design strategies supporting the mobility of people with disabilities while also addressing the needs of the ageing population, which is rapidly increasing. The findings offer valuable insights for urban planners, policymakers, and designers to create inclusive, accessible, and high-quality urban spaces that support people of all ages and abilities.
From co-design to sustainable practice: Reflections on inclusive physical activity for older adults.
No abstract available
This study provides user-centered insights into how inclusive forest design can support the physical, emotional, and social well-being of older adults. It operationalizes universal design principles in natural settings and confirms their relevance through empirical evidence. With the acceleration of global population aging, adapting forest recreation environments to meet the specific needs of older adults is increasingly urgent. This study investigates how infrastructure influences both participation and emotional well-being among older visitors to forest recreation areas. Data were collected from 446 participants aged 65 and older, using a structured survey distributed through in-person contact and digital snowball sampling. Participants reported their infrastructure preferences and their emotional responses related to forest visits. The findings show that older adults highly value site cleanliness, shaded seating, accessible restrooms, and clear signage. Expectations varied significantly according to health status, age group, and visitation frequency. Emotional well-being was positively associated with both comfort and visit frequency. These results demonstrate how inclusive infrastructure plays a vital role in supporting older adults’ access to and enjoyment of forest environments. The study affirms that universally designed forests not only reduce barriers but also promote psychological health and active aging, contributing to developing more equitable and sustainable nature-based recreation areas.
Aging introduces sensory, motor, and cognitive challenges and limited familiarity with digital interfaces, often hindering older adults’ adoption of new technologies. Smartwatches, with their compact size and health monitoring features, promise to improve older adults’ quality of life. However, their small screens and complex interfaces create significant usability barriers. While guidelines for mobile and web interfaces exist, frameworks for smartwatch design still need to be explored. This study addresses this gap by proposing smartwatch-specific design guidelines for older adults. Through an analysis of user challenges, existing design principles, and smartwatch constraints, the research formulates actionable recommendations to enhance usability and user experience. The contributions include identifying key obstacles older adults face with smartwatches, evaluating the applicability of established guidelines, creating tailored design principles for small screens, and developing a design system that balances simplicity, usability, and functionality. These contributions aim to facilitate smartwatch adoption and improve the inclusivity of digital technologies for older adults.
The use of image-schematic metaphors is often promoted for being near-universal across user groups, suggesting that these metaphors have the potential to make novel interactive systems easy to use by both younger and older adults. This study empirically investigates this by eliciting image-schematic metaphors from the spoken language and interaction behaviors of 12 younger adults and 12 older adults undertaking tasks in a technology learning domain. For the first time, we reveal an almost-perfect overlap between image-schematic metaphors used by the younger and older groups, despite the two groups showing significant differences in prior technological knowledge. This finding provides empirical evidence for the near-universality of image-schematic metaphor use across age groups. The study also identifies 37 image-schematic metaphors shared between the two age groups in the technology learning domain to support future design of age-inclusive interactive systems.
The growing number of older adults online has spurred interest in improving web accessibility for this demographic. To evaluate the current state of this field, we conducted a systematic review of studies published between 2014 and 2023. Our research aimed to identify the challenges older adults face online and effective solutions for accessible web design. From 4,052 articles, we identified 25 types of accessibility issues, 104 improvements to enhance website accessibility, 24 technological resources to design these accessibility enhancements, and 20 evaluation methods. Despite notable progress enhancing web accessibility for older people, our findings underscore the need for ongoing improvements for a truly inclusive web, considering the differences within this heterogeneous group and understanding old age not as a problem but as an opportunity.
Recent studies show the promise of VR in improving physical, cognitive, and emotional health of older adults. However, prior work on optimizing object selection and manipulation performance in VR was mostly conducted among younger adults. It remains unclear how older adults would perform such tasks compared to younger adults and the challenges they might face. To fill in this gap, we conducted two studies with both older and younger adults to understand their performances and user experiences of object selection and manipulation in VR respectively. Based on the results, we delineated interaction difficulties that older adults exhibited in VR and identified multiple factors, such as headset-related neck fatigue, extra head movements from out-of-view interactions, and slow spatial perceptions, that significantly decreased the motor performance of older adults. We further proposed design recommendations for improving the accessibility of direct interaction experiences in VR for older adults.
The aging population is accompanied by an increase in the incidence of mild cognitive impairment (MCI). MCI is a pre-dementia stage that can be prevented by early intervention. Traditional MCI interventions are typically delivered in person at community centers or clinics, which can be difficult to access and travel to. In recent years, there has been growing interest in the use of extended reality (XR) for MCI intervention. XR offers advantages such as remote delivery, immersion, and personalization. This study developed and evaluated an XR-based cognitive and physical training system for older adults and MCI patients. By integrating multimodal devices and comprehensive XR assistive technologies, the system aims to enhance cognitive and physical abilities through personalized, engaging training experiences. The evaluation results showed that the system had high user engagement and usability. Additionally, the system was shown to promote cognitive and physical function improvement. The study findings suggest that XR-based cognitive and physical training systems could be a promising tool for MCI intervention.
ABSTRACT Voice assistants are becoming increasingly significant in promoting active aging and digital skills to utilise these technologies fully. This study investigates the acceptance of standalone voice-only assistants among digitally competent older adults in Spain. Besides, it identifies features deemed significant by older adults, providing insights for designers of voice assistants. The research addresses three key questions: the impact of the co-creation process on technological acceptance, factors influencing adoption, and ethical considerations in developing voice-only assistants for older adults. The method employed was an exploratory mixed-methods design in an online co-creation process comprising three stages: an initial session for familiarisation, a game-based co-creation session utilising the Activity Design Cards Toolkit to extract primary requirements for prototype design considering ethics and inclusive values, and a final session to evaluate and refine the prototypes. Findings indicate that the co-creation process significantly enhances technology acceptance among older adults with high digital competence.
Highly Automated Vehicles (HAVs) will be more comfortable for their occupants than common cars from different aspects. For instance, their occupants can access extra spaces to adjust their seats as there will be no steering wheel and gearbox transmission handle in the interior. Among a wide range of seating configuration possibilities, the majority of passengers prefer to be in the Face-to-Face or the Living room configurations that are known as non-standard seating configurations. The present survey investigated how safe are these non-standard seating configurations in a side crash in comparison with the standard one in which all seats are facing the front windshield. Four identical 50th percentile Virthuman models were integrated into a schematic of automated vehicle's interior. Standard three-point seatbelts fastened bodies to up-right seats made from Polyurethane foam. A 30 km/h crash acceleration pulse was applied to the model for simulating side crash with a virtual sledge test in the Virtual Performance Solution (VPS) environment, PAMCRASH module. Results revealed that the Living room configuration was safer for the Rear Left occupant in comparison with the Standard one. Also, the Front Left occupant did not experience safer occasions in non-standard configurations from a Head & Neck injury point of view.
In highly automated vehicles, the conventional roles of driver and passenger are transformed. This paradigm shift presents novel opportunities for the design of the vehicles interior. Recent research has demonstrated that occupants prefer to sit facing each other in highly automated vehicles, e.g., in living room configuration, in addition to conventional seating arrangements. However, studies have indicated that the restraint systems currently employed in new interior concepts do not achieve the desired effect. The shuttle, developed as part of the AWARE2ALL project funded by the European Union, was simulated in a sled test environment, undergoing various modifications to assess the necessary vehicle structures for ensuring occupant restraint. It was determined that reducing the forward movement of the occupant leads to a successful reduction in loads on the occupant. Incorporating a footrest within the design has emerged as a key element in reducing loads among occupants.
This paper proposes a vehicle motion control method to enhance ride comfort at the passenger’s position, aiming to provide optimal ride comfort to passengers during Advanced Driver Assistance System(ADAS)/Autonomous Driving(AD) driving. The control logic is designed to prevent collisions with the preceding vehicle and maintain the road curvature, as in conventional ADAS/AD systems, while also minimizing the longitudinal and lateral accelerations, as well as the lateral velocity at the passenger’s position. The proposed control logic consists of a target vehicle motion module and a controller module. In the target vehicle motion module, the target longitudinal velocity, target lateral velocity, and target yaw rate at the vehicle’s center of gravity are determined. The target longitudinal velocity is determined to prevent collisions with the preceding vehicle and minimize both longitudinal and lateral accelerations, while the target lateral velocity is determined to minimize the lateral velocity at the passenger’s position. The target yaw rate is determined to track the road’s curvature. To track the determined target motions, the controller calculates control inputs for the drive motor, hydraulic braking, front-wheel steering, and torque vectoring. The controller consists of a longitudinal control module and a lateral control module. The longitudinal control module determines the control inputs for the drive motor and hydraulic braking needed to track the target longitudinal velocity, while the lateral control module determines the control inputs for front-wheel steering and torque vectoring needed to track the target lateral velocity and target yaw rate. The proposed control logic was validated in a simulation environment using MATLAB/Simulink and CarSim. The simulation results confirmed that the proposed approach improves the ride comfort at the passenger’s location compared to the conventional ADAS/AD systems.
This research investigates a computational method, which can assist the development of occupants’ passive safety in future autonomous vehicles, more particularly in the definition of head kinematics in rotated seat arrangement during emergency braking. To capture these head motions, the methodology utilised an Active Human Model, whose head kinematics were validated in a previous work in three-point and lap-belt restraint configuration scenarios. A sled model was then built where the seat backrest angle (SBA) and the seat orientation, modelled by rotating the acceleration angle (AA), could be adjusted to represent various ‘living room’ seating conditions. A Design of Experiments study was then performed by varying AA from 0° to 360° in steps of 22.5° and SBA from 20° to 60° in steps of 8°. The responses were subsequently converted into a Reduced Order Model (ROM), which was then successfully validated through a comparison with the kinematic responses predicted with simulations. In terms of simulation time, it was found that the ROM was able to calculate the head kinematics in 3 s instead of the 1.5 h taken using Simcenter Madymo, without compromising predicted responses accuracy. This research has provided a unique method to define head kinematics corridors for seated occupants in autonomous vehicle interiors, including maximum head excursion, head kinematics as a function of time and define for the first time (a) the safe “or’ but not both head envelope within the cabin interior, and (b) capture the seated scenarios where head proximity to airbag systems could be of concern, following emergency braking.
No abstract available
With the development of autonomous driving technology, the passenger vehicles of the future, would allow drivers to participate in non-driving secondary activities or use-cases. In order to facilitate the non-driving use-cases, the interior and the seating arrangements of autonomous passenger vehicles needs to be designed accordingly, The aim of the study is to derive common seating positions and angles for the different autonomous driving secondary activities from their original environments and then experimentally evaluate the user acceptance of these postures for each secondary activity in a passenger vehicle. A user experience questionnaire (UEQ) approach is used to evaluate the user acceptance of the seating postures for the mentioned autonomous driving secondary activity or use-cases. The secondary activities considered in the study include; use of laptop, use of smartphone, general reading, window gazing and sleeping. The angles used for the seating postures include; seat-pan angle, back rest angle and neck-flexion angle.
An intrinsic need exists in the transport vehicle industry to reduce vehicle weight and enhance safety and comfort. This need extends to fully autonomous vehicles, which will gain commonality over time. Since fully autonomous vehicles remove the need for human driver input, a rethink is required to optimise safety, given that the seating designs and configurations in these vehicles could be different. One avenue to potentially increase fully autonomous vehicle safety is integrating the front-row seating into the main body structure. Since an increase in stiffness results in an increase in structural vibration modes and frequencies, it is possible to assess vehicle safety and structural performance through a vibration study. The proposed integrated seating concept has been compared with the existing seating models to assess design feasibility. Increasing safety for fully autonomous vehicles will improve their comfort perception and crash safety. By studying the vibration characteristics of an integrated seating structure, an initial understanding can be ascertained that points the successful design of one in the right direction.
Abstract Autonomous driving will not just change vehicles themselves, but also the entire concept of mobility. New business models and the expansion of individual mobility to new groups of society are merely examples of possible impact. In order to create optimal vehicles for new technologies right from the start, vehicle concept optimization helps to find suitable solutions from numerous possible variations. The package as part of a vehicle concept is currently focused on passenger cars with steering wheels and pedals. Therefore, a new method is needed to plan the package of driverless and autonomous vehicles. In this paper, we present a possible method that separates the vehicle into the interior and the front and rear wagon. This way, different seating layouts can be considered and evaluated in terms of package efficiency. In the results, we check the plausibility by rebuilding a current battery electric vehicle (BEV) and, by way of example, show the variation of the gear angle and different seating layouts, and the resulting package efficiency.
In the UNICARagil project, funded by the German Federal Ministry of Education and Research, four modular autonomous vehicle concepts are de-veloped. The paper deals with an autonomous taxi designed for ride sharing and non-driving tasks and activities. An online-based survey is conducted to evaluate integrated components and features of the seating environment under different conditions of use. The expectations, preferences and wishes of 181 survey par-ticipants are compared with the aspects and features to be offered in the auto-TAXI. The results show that using the equipment elements of the seating envi-ronment depends on various influencing factors such as trip duration, type of trip, privacy and activity. In general, users' expectations of the autoTAXI's equipment elements are met.
Fully autonomous vehicles are not yet available for consumers to experience; however, as experts predict they will be ready for the consumer market in the not-too-distant future, it is important to consider the spatial design of such vehicles. As the interior of a vehicle is a confined space, it is important to design a flexible layout in different aspects of the overall space. Therefore, this study aimed to analyze the relationships among various elements related to the use of space in a face-to-face seating arrangement. Using mock-up, observational surveys, questionnaires, and the think-aloud research method within an ethnographic observation framework, we conducted experiments on three study participants who were aware of the changing concept of autonomous vehicles. One of the key findings of our analysis is that various activities and actions can occur in a face-to-face seating arrangement. It is important to recognize that face-to-face seating arrangements are not just to facilitate conversation but can be seen as an environment in which each passenger can conduct other in-vehicle activities individually. Based on these findings, we recommend that needs for activities be considered when designing spatial components in a face-to-face seating arrangement.
Autonomous vehicle (AV) technology has brought a shift in the traditional role of the driver. This paper applies a user-centred design approach to designing a new AV interior to better support drivers. Three empirical studies were conducted, involving a total of 92 drivers (with 44 in Study 1, 12 in Study 2, and 36 in Study 3) to explore user needs and requirements in an AV. In Study 1, safety and comfort, together with a variety of non-driving activities, were identified as the principal concerns about future autonomous vehicles. Based on these findings, Study 2 proposes a new rotatable seating position for AVs, with an in-vehicle information display to facilitate users' activities and situational awareness while driving. Study 3 consists of a series of laboratory simulator evaluation studies, and this indicated that drivers in the proposed design condition had better situational awareness in an AV when dealing with take-over situations. Such findings suggest the possibility of applying rear-facing seats in autonomous vehicles to support in-vehicle non-driving activities. Some specific implications of designs to enhance a driver's situational awareness have also been suggested.
The biggest advantage of autonomous driving is the value added free time that the users would enjoy during travel. Research shows that the users would use this time to participate in different non-driving activities: which include resting, sleeping, using smartphone, reading for pleasure, working and the most common activity, i.e. looking outside the window and enjoying the landscape. The challenge for the automotive industry however is to develop vehicle interior and seating concepts to facilitate the different ergonomic seating postures, which would allow the users to pursue these activities for a longer period. The paper helps to understand why digital human modelling and occupant packaging would be of increasing importance in the interior development of autonomous driving vehicles. Discussed in the paper are proposed tools which when implemented would aid the interior development of vehicle interior in the virtual phase and would help to recognize vehicle integration and package problems earlier on in the vehicle development phase.
Autonomous driving is currently the most discussed topic in the automotive sector and one of the biggest advantages of fully autonomous driving is the value-added freed time, which the drivers could potentially use to for non-driving secondary activities. Some of the most popular non-driving secondary activities, include window gazing, reading a book, using smartphone, working on a laptop and taking a nap. The study aims to experimentally derive and evaluate the seating positions for these activities in a passenger vehicle. The considered seating angles for the positions, include seat-pan angle, backrest angle and neck flexion angle. The study was conducted in a BMW 7 Series vehicle under stationary conditions. Once the subjects adjusted the seat to their personal preference, the seating angles were recorded using EDIABAS, an internal BMW tool. The participants’ were also required to evaluate each seating position, which they adjusted to their personal preference, using a user experience questionnaire (UEQ). The UEQ is aimed to evaluate the user acceptance of these seating positions inside the passenger vehicle. A total of 51 subjects participated in the study. An average value of seating angles for each activity was calculated, to derive the respective optimum seating position for window gazing, reading a book, using smartphone, working on a laptop and taking a nap in a passenger vehicle. The seating positions derived from the study are useful information that could be used in the development of autonomous driving vehicle interior and in designing seating layout, which would allow the users to participate in activities other than driving.
The increasing adoption of reclined seating postures in modern vehicle interiors challenges the assumptions underpinning current passive safety systems and occupant protection assessment frameworks. While restraint technologies and certification protocols have historically been developed for upright configurations, emerging trends in autonomous driving and comfort-oriented designs promote relaxed postures that fundamentally alter occupant kinematics, loading path, and consequently the injury mechanisms. This review critically synthesizes experimental and numerical studies addressing occupant biomechanics, restraint system performance, and injury risk in reclined seating. Evidence from crash tests using Anthropomorphic Test Devices and Post-Mortem Human Surrogates, alongside high-fidelity numerical Human Body Models, is analyzed to identify consistent trends and methodological limitations. The results highlight increased forward excursion, elevated submarining propensity, and posture-dependent abdominal and lumbar loading as critical consequences of increased seatback recline. Furthermore, this review discusses the effectiveness of adaptive restraint strategies, including active repositioning and modified airbag–belt integration. By identifying existing research gaps and regulatory limitations, this work aims to provide a roadmap for the development of future safety systems that ensure robust protection for all occupants in the era of automated mobility.
In a fully autonomous vehicle, the driver becomes a passenger, free to adopt different seating positions. This change challenges traditional passive safety systems—such as seatbelts, airbags and seat design—that are optimised for a forward-facing position. As autonomous vehicles are integrated into mixed traffic with conventional cars, solutions need to address these challenges. In this intermediate stage, fully autonomous cars will need a system that, in the event of an accident, can rotate the seats to the most ideal position tested by the manufacturer. This could be a number of positions where the seat, airbags and seatbelts are optimised, taking into account the expected direction of impact. It is important that the rotation is not too radical, as this would increase the risk of injury. In addition, the seat dimensions need to be increased to improve energy absorption in the event of a collision, thereby reducing the impact forces on the occupants and improving overall safety. To improve passive protection, airbags will continue to be used in the future, but in completely new positions, sizes and shapes. This research aims to identify potential passive occupant safety solutions for seat positions that have been rotated in fully autonomous vehicles. The finite element simulation model on which the results in this article are based was developed in an earlier phase of the research. The current research combines two previously conducted research directions, using the modified seat and the developed airbag concept. This research’s main outcome is a system that effectively protects occupants in rotated seat positions. It maintains all evaluated injury criteria below their threshold limits and ensures controlled occupant kinematics.
Some Automated / Autonomous Vehicles (AVs) have unique seating configurations (stagecoach and campfire seating) which present expanded occupant safety challenges. Significant portions of the National Highway Traffic Safety Administration (NHTSA) Federal Motor Vehicle Safety Standards (FMVSS) do not yet align with AVs containing unique seating. This paper series takes the NHTSA occupant safety standard approach for conventional forward-facing seat vehicles where many compliance evaluations are in the frequently occupied front row and expands it to stagecoach and campfire AVs where the rear seating row is anticipated to be frequently occupied. The approaches proposed are from a logic-based safety-focused analysis and in many cases previously published material. The goal of this paper series is to offer regulatory proposals that enable equivalent performance for these AVs to existing forward-facing seating vehicle occupant safety standards and meet Executive Order 13045 on child safety.Part 1 (this paper) focuses on occupant protection for the front and rear seating rows in stagecoach and campfire seating AVs for: front impacts (FMVSS-208), windshield mounting (FMVSS-212), windshield glazing (FMVSS-219), rear impacts (FMVSS-301/305), head restraints (FMVSS-202a), head impacts (FMVSS-201), side impacts (FMVSS-214), roof crush (FMVSS-216a), ejection mitigation (FMVSS-226), and door pinch (a potential FMVSS-118 addition).Some of the proposals address occupant performance for vehicles without traditional leg and restraint reaction surfaces. In addition, an interior safety sensing approach that assesses if occupants are properly restrained before a ride can begin is proposed as an alternative / a replacement for unbelted in-position occupant performance compliance evaluations. This document also provides regulatory condition thoughts for AVs without a usable driver seat location.Part 2 discusses interior safety sensing and associated messaging.These approaches can be used in industry-wide regulatory next step contemplation and deliberation for unique interior seating arrangement AVs, including public discussions, safety research, approach proposal development, and rulemaking efforts.
A persistent and vexing challenge for blind and low vision (BLV) travelers involves finding assigned and/or available seating in different transportation modalities. This is particularly problematic as autonomous vehicle (AV) rideshares and shuttles become more prevalent given the absence of assistance from human operators. While audio-based smartphone systems are the current standard for BLV interaction, emerging evidence suggests that multisensory systems, combining haptics and spatialized audio, may improve accessibility across the trip. We present a user study with 8 BLV participants comparing 1) audio-only descriptions and 2) multisensory information using vibro-audio maps and environmental audio cues to assist in seat finding. Results suggest higher accuracy, faster completion times, and stronger user preference for the multisensory condition. Participants also emphasized the importance of well-timed, contextually relevant information and greater control over information delivery. These findings highlight the promise of multisensory systems to improve independent travel for BLV users in future AVs.
The evolution of autonomous vehicle interiors presents both opportunities and challenges in optimizing space for Non-Driving Related Activities (NDRAs). Previous research explored the reconfiguration of interiors in autonomous vehicles to support key activities such as reading, working, relaxing, and conversing. Building on this foundation, the present study examines how seating arrangements and interpersonal distances influence passenger comfort and conversational quality. Drawing on proxemics theory, the investigation considers the impact of gender, age, and nationality on interpersonal spatial preferences within vehicle cabins. Thirty-seven participants (aged 23-33) experienced three seating configurations -alpha (side-by-side), beta (opposite directions with parallel axes), and gamma (face-to-face)- in a virtual environment developed using Unity and accessed through HoloLens 2. Participants selected their preferred interpersonal distance from five predefined options while interacting in Augmented Reality (AR) with a virtual mannequin. Objective measurements were supplemented with subjective feedback from a post-test questionnaire. This study addresses the following research questions: 1) Which seating configuration is most comfortable for passengers during a conversation? 2) What are the ideal seating distances in each configuration? 3) How does gender influence interpersonal space requirements? 4) How does ethnicity impact interpersonal space preferences? Findings show no significant difference in distances chosen when conversing or not. Distance varied significantly with social relationships. Gender, body size, and culture influenced preferences. Results suggest the need for adaptable interior layouts that can accommodate diverse interpersonal spacing needs.
No abstract available
With the development of China's aging population and the popularization of intelligent technology, the service design applied to the elderly has attracted more and more attention.According to relevant data, the elderly have more leisure time after retirement, especially the young elderly have a higher frequency of street activities. This paper designs a public seat suitable for aging, and realizes the setting of multiple modules through Python sensing control system. The seat is composed of a sedentary reminder module and a seat surface heating module. The seats are equipped with black solar panels for USB、wireless charging and inductive lighting.From the point of view of geriatric ergonomics, the design of the seat is successively designed in the order of sitting - rising - leaning - walking, to improve the functionality and comfort of the seat.
The rise of new interactive, digital and connected objects is bringing about significant transformations in our world, generating new ways of living and new channels of access to communication. The healthcare sector is one of the sectors most affected by this digital revolution.Gerontechnology, a relatively recent field of research, studies the interaction between increasing longevity combined with a decreasing birth rate and the development of emerging healthcare technologies (Bouma et al., 2007; Chen, 2020).Therefore, from a theoretical point of view, digital health technologies (wearable devices, social media, robotics, smart devices, virtual technologies, etc.) can support successful ageing (van Bronswijk et al., 2009; Lee et al., 2020), but in practice, the results achieved do not live up to the expectations of elderly users, as the elderly population is less able to access new technologies as they are less open to innovation (Loges & Jung; 2001; van Dijk & Hacker, 2003; Manchester & Jarke, 2022).The EU's 2022 report (European Commission, 2022) on the Digital Economy and Society Index (DESI) places Italy 18th among the 27 EU Member States, which can be attributed to the relative lack of literacy of the Italian elderly population, although, compared to 2021, Italy gained two points (20th place). In order to limit the Grey Digital Divide, gerontechnology design in recent years has been influenced by the anthropocentric approach, a design approach that places the elderly within the design process (Baker et al., 2019; Vines et al., 2015; Wallace et al., 2020) considering them as a social resource and not as frail, sick and dependent. Design, and in particular the Human-Centred Design approach, can play a crucial role both in understanding the needs of the elderly population and in translating these needs into digital products that are more suitable and relevant to their purpose. For these reasons, in this article we introduce the first results of the research carried out by the Ergonomics and Design Lab. (LED) of the University of Florence within the research programme "Age-It Ageing well in an ageing society", an extended partnership financed within the PNRR (National Recovery and Resilience Plan, Funded by the Italian Government with the European funds Next Generation Eu Mission 4 "Education and Research" Component 2 "From Research to Enterprise"). The Age-It programme, in which 25 partners, including Universities and Research Centres, participate, is led by the University of Florence and consists of 10 spokes. LED researchers are involved in spoke 9, which aims to study advanced gerontechnologies for active and healthy ageing. The objective is therefore to reduce the digital divide between generations through the development of design guidelines that can help the elderly to use digital health technologies consciously and safely.The article will discuss the research questions, method, results and future developments.
No abstract available
No abstract available
No abstract available
No abstract available
Easy entering (i.e. ingress) and exiting (i.e. egress) a vehicle play an important role in ensuring a comfortable driving experience. Nevertheless, car ingress and egress involve complex movements requiring a lot of sensory and motor information. Due to the age-related cognitive and motor decline, car ingress and egress often represents a difficult task for older population, often resulting in falls. A seat prototype, integrating a roto-translating system aimed to help elderly people in accomplish this task, has been realized. The objective of the current study is to evaluate the seat prototype through both subjective (i.e. interviews and checklists) and objective measures (i.e. biomechanical variables) in order to verify its efficacy in lowering the elderly physical load during the car ingress/egress. Thirty healthy elderly subjects aged over 65 y.o., six of which affected by non-pathological physical limitations, have been included in the study. The results showed that the proposed roto-translating system facilitate the car ingress/egress by reducing both the trunk and knee range of motions and the muscle fatigue while entering and exiting a vehicle. In addition, the system seemed to be appropriate in order to limit the fall risk during the sill passing.
No abstract available
No abstract available
No abstract available
No abstract available
The time it takes a driver to get in and out of a vehicle, and how comfortably they can perform this task, are important considerations for vehicle design. Older drivers are keeping their licenses longer and driving more miles, making it more important than ever to study how vehicle design parameters interact with the sensorimotor changes due to aging and disease. 48 older subjects (27 males, 21 females) between the ages of 67 and 89 years were tested. Twenty-four were healthy, 12 had osteoarthritis and 12 had diabetic polyneuropathy. Subjects completed both physical capacity tests and motion capture testing of ingress/egress in seven different vehicles represented by the Human Occupant Package Simulator. A control group of 48 younger drivers also completed ingress/egress testing. Motions, captured using Vicon cameras, were used to calculate the main outcome variables of Ingress Time and Egress Time. The third main outcome, Perceived Discomfort, was measured by asking the subjects to rate each ingress/egress motion. Inverse Egress Time and Discomfort were significantly correlated, with a correlation coefficient of -0.45. Longer times were associated with greater discomfort. Linear mixed-effect modeling showed that vehicle design factors that significantly influenced the discomfort or the duration of ingress/egress were the height of the vehicle seat with respect to the ground, as well as the location of the seat with respect to the sill and the roof rail. In conclusion, Perceived Discomfort and Ingress/Egress Time provide guidance on how vehicle design can improve the driving experience for elderly drivers.
Occupant packaging is one of the key tasks involved in the early architectural phase of a vehicle. Accommodation, as a convention, is generally considered related to a car’s interior. Typical roominess metrics of the occupant like hip room, shoulder room, and elbow room are defined with the door in its closed condition. Several other roominess metrics like knee room, leg room, head room, and the like are also specified. While all the guidelines are defined with doors in their closed condition, it is also important to consider the dynamics that exist while the occupant is entering the vehicle. This article expands the traditional understanding of occupant accommodation beyond conventionally considering the vehicle interior’s ability to accommodate anthropometry. It broadens the scope to include dynamic conditions, such as when doors are opened, providing a more realistic and practical perspective. As a luxury car manufacturer, it is important to ensure the best overall customer experience at each touch point of the vehicle. When the customer enters the vehicle, there should be sufficient space provided by the door opening angle for a comfortable entry. The larger the opening angle, the better is the “entry accommodation” and vice versa. However, a wide-open door also necessitates the customer to bend more, after being seated, to reach its handle and close it. Thus, it becomes a compromise between what is possible as accommodation while the customer is entering the vehicle and how easy it is to close the door after being seated. The same logic holds good while the customer opens the door and exits the vehicle. This article aims to develop a customer loss function (CLF) between the two conflicting criteria by considering relevant anthropometric distribution of customers. This study focuses on driver compartment and the methodology developed is also pertinent to rear compartment with minor adaptations. Since driver’s seating position is heavily dependent on anthropometry, finer details of occupant seating position are also considered in this study. CLF developed in this article will help the designer and packaging engineers in making informed decisions on the door opening angle, by being conscious of the customer loss/gain for defined performance metrics.
No abstract available
No abstract available
No abstract available
No abstract available
No abstract available
No abstract available
No abstract available
No abstract available
No abstract available
No abstract available